Fixed
Fixed
The Armourile Portable Ground Monitor has been specially designed to combine very light weight with excellent stability. Its a robust and effective and can very quickly be brought into use. It folds compactly for vehicle stawage. It is intended for use in the medium output range, typicaly up to 400 g.p.m. (1800 l.p.m) but higher outputs can be tolerated by using the anchor spike which is also recomended for use on smooth surfaces to assist in resisting jet reaction forces.
Features
- Lightweight
- Low maintenance
- Compact
- Low pressure loss design
- High durable corrision resistant materials
Angus HI-COMBAT Turbex MkII High Expansion Foam generators are designed to produce large capacities of high expansion foam, up to 200 cubic metres (7,000 cu.ft) per minute for fast and effective flooding of large and inaccessible spaces with minimal water consumption and subsequently minimal water damage.
Features
- Type of foam produced can be varied in the range of 500-1100:1 expansion ratio.
- Unique by-pass system allows performance to be maintained when working against high back pressures.
- Special in-built filter system protects the turbine and inductor from blockage due to solid particles in the water supply.
Angus "FI" In-line Inductors are designed primarily for use in fixed installations and provide a simple and reliable method of proportioning foam concentrate in constant flow applications.
Angus Balanced Pressure Foam Proportioners (BPPs) are designed for use in fixed systems to introduce foam concentrate at a pre-determined rate into the fire-water supply, over a varying range of foam solution demands.
Uniductor, when matched with Angus Hi-Combat Foam branchpipes or nozzles, provides the simplest possible means of getting foam to the fire where it is needed.
Features
- High grade stainless steel with polyester internals
- Exceptional corrosion resistance
- Suitable for use in the most extreme environments
- High grade corrosion resistant materials
- Require no maintenance
- Modular construction
The Angus Fire Top Pourer Set (TPS) Mk5 is designed for use in foam systems for the protection of flammable liquid storage tanks and combine foam generation, vapour sealing and foam pouring in a robust, low-maintenance integral unit.
Features
- Narrow pressure tolerance bursting disc for increased reliability
- Impregnated graphite bursting disc for leak free operation
- Reusable bursting disc holder
- Air/liquid flow controller for optimum foam quality
- Body lid retained by stainless steel swing bolts for increased safety
- Captive foam enhancer for ease of access and maximum foam quality
- Integral one piece construction, including deflector, for quick and reliable installation
- Heavy duty welded construction to minimise distortion during operation
Angus Rimseal Foam Equipment is used for the protection of vertical open top floating roof (OTFR) storage tanks and comprises two elements - the Rimseal Foam Generator (RFG) which produces expanded foam when supplied with foam solution and the Rimseal Foam Pourer (RFP) which delivers the foam gently into the rimseal area.
Features
- Stainless steel mesh at the foam exit helps to prevent blockage from insects and nesting birds.
- Accurate factory-calibration ensures full compatibility with existing foam concentrate induction systems.
- Suitable for use with Angus low expansion foam concentrates.
Angus Medium Expansion (MEX) Bund Pourers are designed for fire protection systems and vapour suppression on bunded or diked areas surrounding flammable liquid or toxic chemical storage tanks. They are also suited for other applications requiring large volumes of free flowing foam eg. process areas, warehousing and storage protection.
Features
- Lightweight, compact and robust units.
- Operation at low pressure minimises pumping capacities and water requirements.
- Effective when used with Angus fluoroprotein and film forming fluoroprotein foam concentrates
Angus High Back Pressure Foam Generators (HBPGs) are used in sub-surface foam injection systems which are primarily designed for the protection of fixed roof storage tanks containing hydrocarbon fuels.
Features
- Non-return valve is fitted as standard to ensure that fuel does not escape from the air inlet hole.
- Two pressure gauges
- Measure foam solution input pressure and system back pressure
- Bursting disc assembly
Angus Foam/Water sprinklers are open, air aspirating discharge heads designed for use as part of an engineered fire protection system. Each sprinkler is designed for mounting in the pendant position and produces a solid cone discharge with very similar spray patterns for both foam and water. The fire protection system can therefore be designed in accordance with NFPA 11/16, to deliver an initial foam discharge to combat a flammable liquid fire, followed by a period of water discharge to provide additional cooling if required.
Features
- Foam/water sprinklers are compact.
- Robust and consequently less easily damaged than conventional designs.
- Each sprinkler is entirely constructed from 316 stainless steel, which provides excellent corrosion resistance
The Angus Mark III Deluge Valve is a straight through, bottom entry top exit, firewater latched, deluge valve specifically designed and approved for automatic fire protection systems. It's unique design of actuator uses the fire main pressure to keep the valve closed - no external services are required.
