Foam Equipments
-
ANGUS AF120
The innovatively designed Angus HI-COMBAT AF120 MK2 is a fully self-contained mobile foam unit which has been specifically developed for the rapid deployment of foam extinguishing agent to fires and chemical spills. Further refinement has been achieved through a detailed ergonomic review and lower centre of gravity design, resulting in improved handling and mobility.Requiring only connection to a suitable water supply, the standard unit comprises a 120 litre foam concentrate tank, HI-COMBAT UNI-225 inductor and F225/HU low expansion foam branchpipe. Also two 15m lengths of dutch coiled 45mm diameter Duraline fire hose, fitted with light alloy 2 1/2" instantaneous couplings to BS336 (other connections available to special order). A shut off ball valve is also fitted to the inductor as standard, to facilitate swift operation by just one person.
This improved performance combined with an effective fire fighting capability makes the Angus HI-COMBAT AF120 Mk2 ideal for the protection of smaller flammable liquid hazards such as boiler rooms, oil storage and loading terminals, paint or spirit stores, airfields, industrial sites, generator rooms and similar high risk areas. The HI-COMBAT AF120 Mk2 provides a compact and highly efficient fire fighting unit, on hand for a fast response with minimum manpower requirements.
This highly versatile unit is suitable for use with any type of foam concentrate, but is particularly effective when used with Angus Alcoseal and Petroseal Film Forming FluoroProtein foams. When used with Alcoseal 3-3 it effectively becomes an AF240, doubling the operating time on Polar Solvent fires.
The ability to use Angus HI-COMBAT MEX225U and MEX450U medium expansion foam branchpipes with this unit, makes it particularly suitable for rapid intervention in cases where vapour suppression of chemical spills is a necessity. All component parts and materials have been chosen to minimise maintenance requirements. The foam tank is constructed from high strength, chemicalresistant GRP resin and is mounted on a corrosion resistant, thermoplastic coated steel chassis. A footbrake is also provided for maximum stability on a slope.
Features
- Fast acting and effective against nearly all fire hazards
- Environmentally neutral - zero ODP, zero GWP
- Low installation and maintenance costs
- No post-fire residues or damage to protected equipment
- Electrically non-conductive
- Safe for occupied areas
- Can be integrated with existing detection and alarm systems
- Automatic or manual release
- Engineered or modular design
- Minimum downtime after a fire
-
GROUND MONITOR
The Armourile Portable Ground Monitor has been specially designed to combine very light weight with excellent stability. Its a robust and effective and can very quickly be brought into use. It folds compactly for vehicle stawage. It is intended for use in the medium output range, typicaly up to 400 g.p.m. (1800 l.p.m) but higher outputs can be tolerated by using the anchor spike which is also recomended for use on smooth surfaces to assist in resisting jet reaction forces.Features
- Lightweight
- Low maintenance
- Compact
- Low pressure loss design
- High durable corrision resistant materials
-
TURBEX
Angus HI-COMBAT Turbex MkII High Expansion Foam generators are designed to produce large capacities of high expansion foam, up to 200 cubic metres (7,000 cu.ft) per minute for fast and effective flooding of large and inaccessible spaces with minimal water consumption and subsequently minimal water damage.Features
- Type of foam produced can be varied in the range of 500-1100:1 expansion ratio.
- Unique by-pass system allows performance to be maintained when working against high back pressures.
- Special in-built filter system protects the turbine and inductor from blockage due to solid particles in the water supply.
-
FOAM UNIDUCTOR/FOAM INDUCTORS/FOAM PROPORTIONERS
Angus "FI" In-line Inductors are designed primarily for use in fixed installations and provide a simple and reliable method of proportioning foam concentrate in constant flow applications.Angus Balanced Pressure Foam Proportioners (BPPs) are designed for use in fixed systems to introduce foam concentrate at a pre-determined rate into the fire-water supply, over a varying range of foam solution demands.
Uniductor, when matched with Angus Hi-Combat Foam branchpipes or nozzles, provides the simplest possible means of getting foam to the fire where it is needed.
Features
- High grade stainless steel with polyester internals
- Exceptional corrosion resistance
- Suitable for use in the most extreme environments
- High grade corrosion resistant materials
- Require no maintenance
- Modular construction
-
TOP POURER-MK5
The Angus Fire Top Pourer Set (TPS) Mk5 is designed for use in foam systems for the protection of flammable liquid storage tanks and combine foam generation, vapour sealing and foam pouring in a robust, low-maintenance integral unit.Features
- Narrow pressure tolerance bursting disc for increased reliability
- Impregnated graphite bursting disc for leak free operation
- Reusable bursting disc holder
- Air/liquid flow controller for optimum foam quality
- Body lid retained by stainless steel swing bolts for increased safety
- Captive foam enhancer for ease of access and maximum foam quality
- Integral one piece construction, including deflector, for quick and reliable installation
- Heavy duty welded construction to minimise distortion during operation
-
RIMSEAL FOAM POURER
Angus Rimseal Foam Equipment is used for the protection of vertical open top floating roof (OTFR) storage tanks and comprises two elements - the Rimseal Foam Generator (RFG) which produces expanded foam when supplied with foam solution and the Rimseal Foam Pourer (RFP) which delivers the foam gently into the rimseal area.Features
- Stainless steel mesh at the foam exit helps to prevent blockage from insects and nesting birds.
- Accurate factory-calibration ensures full compatibility with existing foam concentrate induction systems.
- Suitable for use with Angus low expansion foam concentrates.
-
MEX BUND POURERS
Angus Medium Expansion (MEX) Bund Pourers are designed for fire protection systems and vapour suppression on bunded or diked areas surrounding flammable liquid or toxic chemical storage tanks. They are also suited for other applications requiring large volumes of free flowing foam eg. process areas, warehousing and storage protection.Features
- Lightweight, compact and robust units.
- Operation at low pressure minimises pumping capacities and water requirements.
- Effective when used with Angus fluoroprotein and film forming fluoroprotein foam concentrates
-
HIGH BACK PRESSURE FOAM GENERATOR
Angus High Back Pressure Foam Generators (HBPGs) are used in sub-surface foam injection systems which are primarily designed for the protection of fixed roof storage tanks containing hydrocarbon fuels.Features
- Non-return valve is fitted as standard to ensure that fuel does not escape from the air inlet hole.
- Two pressure gauges
- Measure foam solution input pressure and system back pressure
- Bursting disc assembly
-
K40 & 20 FOAM WATER SPRINKLER
Angus Foam/Water sprinklers are open, air aspirating discharge heads designed for use as part of an engineered fire protection system. Each sprinkler is designed for mounting in the pendant position and produces a solid cone discharge with very similar spray patterns for both foam and water. The fire protection system can therefore be designed in accordance with NFPA 11/16, to deliver an initial foam discharge to combat a flammable liquid fire, followed by a period of water discharge to provide additional cooling if required.Features
- Foam/water sprinklers are compact.
- Robust and consequently less easily damaged than conventional designs.
- Each sprinkler is entirely constructed from 316 stainless steel, which provides excellent corrosion resistance
-
DELUGE VALVE MK3
The Angus Mark III Deluge Valve is a straight through, bottom entry top exit, firewater latched, deluge valve specifically designed and approved for automatic fire protection systems. It's unique design of actuator uses the fire main pressure to keep the valve closed - no external services are required.